I00004SV

Input/Output

VPX Ecosystem

Active

The I00004SV is a detector front-end module that provides configurable power delivery, telemetry, and high-speed physical-layer connectivity for imaging systems.

The card integrates independent analog and digital power, health monitoring, and differential communications. Its modular architecture supports both fully redundant and dual-independent configurations.

The I00004SV performs electrical interface functions only. Digital processing, detector control, image acquisition, and application-specific algorithms are implemented by external processing hardware, allowing the card to integrate with a variety of detector-controller architectures and system designs.

When combined with Novo Space computers, the I00004SV forms a complete detector interface solution.

Main features

Fully redundant or dual-independent configurations
Independent analog and digital power conditioning with low-power shutdown mode
Compatible with multiple detector-controller architectures
No embedded processor or firmware, or image-processing logic

Downloads

Datasheet
Download

Related products

SBC004SV
SBC
and 4 more tags
The SBC004SV is a single-board computer compliant with the VITA 78 SpaceVPX standard. It operates as a Payload Module and includes an FMC interface for I/O expansion and customization.

It features an AMD/Xilinx Versal ACAP with 8 GB/16 GB of ECC-protected DDR4 on a 72-bit bus and 1 Gb NOR flash for configuration and firmware. The board also integrates two 1 Tb TLC NAND flash devices accessible from the Versal SoC.

A Microchip PolarFire FPGA serves as the system controller, providing platform management, health monitoring, and fault recovery. It includes 4 GB of ECC-protected DDR4 and three 1 Gb NOR flash devices for configuration, firmware, and user data. The controller also supports user-defined logic and I/O for low-power auxiliary processing.

SBC002SV
SBC
and 3 more tags
The SBC002SV is a high performance single board computer compatible with the Vita 78 SpaceVPX standard.

The main device is a Zynq Ultrascale+ with a 4 GBytes ECC protected DDR3 SDRAM. A VITA 57.1 FMC connector allows to extend its capabilities with any compatible FMC board.

This is our ideal platform for implementing machine learning using TensorFlow and PyTorch directly on FPGA fabric without modification while keeping a low power consumption.

SBC005SV
SBC
and 3 more tags
The SBC005SV is a general-purpose unit compatible with the Vita 78 SpaceVPX standard. The design supports operation as System Controller or Payload as defined in the SpaceVPX standard.

The SBC005SV includes a PolarFire FPGA with 2GB of ECC protected DDR3 SDRAM. There are also up to 128 MBytes of triple modular redundant non-volatile NOR memory and 32 GBytes BOL of raw SLC NAND memory for the file system (ECC protection optional). The triple redundant NOR memory provides safe storage for the application software and operating system when a softcore processor, such as RISCV, LEON is used.

The DDR3 memory can function as a buffer to store data transferred between the high-speed SpaceVPX interface and the FMC interface.

SBC003SV
SBC
and 2 more tags
This single board computer is ideal for low power applications. Its main device is a Smartfusion2 from Microsemi, a System on Chip (SOC) that supports a Microcontroller subsystem (including an M3 microcontroller, DDR controller and other peripherals) as well as FPGA fabric in the same device. The inclusion of both a hard microcontroller subsystem as well as a soft FPGA fabric enables great flexibility an essential part of Novo Space's DNA. These FPGA fabric allows software defined architectures and IOs, allowing the support of multiple options for FPGA Mezzanine Cards (FMCs) as well as IO to the backplane. This is the ideal platform for implementing machine learning using TensorFlow and PyTorch directly on FPGA fabric without modification while keeping a low power consumption.